Mazda 3 BM 2014-2019 - 9 and 10.1 inch, radio dash or screen dash
Mazda built this car with two different tops to the centre stack, and owners find out when the fascia they bought doesn't fit. Ours covers both: a 9 or 10.1 inch touch screen in a moulded frame that keeps your vents, hazard switch and climate dials in place.
Two versions left the factory and they don't look related. The base Mazda 3 BM 2014-2019 has a dot-matrix radio in a shallow recess above the centre vents: six presets, one knob, and an orange display that shows you a frequency and little else.
The higher trim swapped that radio for a floating screen on a short stalk above the same vents. Behind both, the aperture is the same shape, so one moulding covers the pair.
| Version | Factory top unit | What the kit replaces |
|---|---|---|
| A | Dot-matrix radio, no screen | Radio and its recess |
| B | Floating non-touch screen | Screen, stalk and bracket |
I've heard the fascia story go wrong more than once, so send a photo of your console and the VIN. If you've been searching Mazda 3 BM 2014-2019 Car Multimedia Player, this is that part, and a Mazda 3 BM 2019 Screen and Frame Kit is what the box says.
I've had this dash apart enough to know which half is easy: your top unit releases on clips, no cutting, ten minutes with a trim tool. The annoying part is the vent frame, which comes with the fascia, so both silver trims have to seat square.
A small orange display on radio cars, a 7-inch non-touch panel on the others. No maps beyond a phone, no projection.
A 9 or 10.1 inch panel tilted toward the driver, projection on the glass, vents, hazard and climate dials untouched underneath.
Console and VIN decide the harness and dash version.
Work the edges with a pry tool, then photograph the connectors.
Radio, camera, pairing, then the vent frame. A dead plug found after the fascia clips in is the tedious version.
Nothing gets cut or hangs off the windscreen. If you want a Mazda 3 BM 2015 CarPlay Retrofit Screen that reads like a factory option, this is the shape of it, and the Mazda 3 BM 2016 Android Car Stereo side matters more than a spec sheet on a school run.
Three routes exist, and only one keeps your dash looking like the brochure. Why take the other two?
| Comparing | Keep the factory unit | Universal double-DIN plate | 9613/2613 |
|---|---|---|---|
| Display | Small, no touch | Whatever the radio has | 9 or 10.1 inch, up to 2K QLED |
| Phone link | Bluetooth audio only | Usually a dongle | CarPlay on the screen |
| Vents and hazard | Untouched | Often trimmed or moved | Keep their opening and trim |
Keep the dash, keep the controls and add the screen, because a Mazda 3 BM 2014-2019 Car Multimedia Player that fights the console saves nobody anything.
The fascia replaces the top shelf and vent surround only. Nothing below the vents moves.
FM with station text and six presets, not a dot-matrix and a scroll button.
Maps, calls and messages on the panel you can actually see, phone in your pocket.
An android car stereo lives or dies on how its bezel meets your trim, which is the argument for a moulded dash kit over a cage. The 2K 2000x1200 glass is fully laminated, so midday sun throws less glare and black stays black at night. If your car does short trips, you won't care, and I'd spend the difference on a camera. Wouldn't you? A Mazda 3 BM 2018 2K QLED Touchscreen build swaps straight on the same harness.
The launcher isn't welded shut. An online theme page carries packs named Dream, Batman and Chess, and the car-style home screen puts a speed ring, a map panel, radio and media widgets on one page.
Two touch keys sit on the left edge of the bezel, MIC and RET, so you're not hunting a menu to mute the microphone. Voice control runs in ten languages, English and Russian through to Thai and Indonesian, on plain commands: open the radio, close the music, volume up. No data connection needed.
Our bench unit reported a Unisoc ums512 board, 6 GB and 128 GB, a ROHM32107 processor, a TDA7708 tuner, Bluetooth 5.0 and GPS with Beidou. That's the machine we photographed, not a promise for every build, so confirm memory before you pay. Most Mazda 3 BM 2014-2019 owners come for a Mazda 3 BM 2015 CarPlay Retrofit Screen and stay for the radio.
Two lists matter, and they're easy to mix up.
| Group | What you get | Order note |
|---|---|---|
| In the kit | Screen, frame, brackets, harness, external microphone | Year and dash version |
| Cameras | AHD reverse (S305), 360 surround (S360A), guideline camera (S302) | Separate parts, fit with the screen |
The DVR-013 camera and S320 front camera on that list are for the DN series only, so don't order them for your BM. If you're weighing the wide option, the 12.3 inch WH4613 is a different kit for the same car, wider glass and its own fascia. The Mazda 3 BM 2019 Screen and Frame Kit in 10.1 stays flush with the vent trim if you want it to read as factory.
Don't read that table as what's in this box: it's the range across the big-screen boards, amp interface, DSP and panel type change with the board. A Mazda 3 BM 2018 2K QLED Touchscreen exists only on builds carrying that panel.
We ship worldwide, most often to Europe, North America, the Middle East and Australia, harness pinned for your car. A Mazda 3 BM 2016 Android Car Stereo with the wrong plug is a parcel back to us.
Full product information for this kit is on the product page: See the 9613/2613 on the product page.
Zhuhai WITSON Industrial Co., Ltd. - Tel: +86-756-8120312, 8120211, 8120212.
Send your year, a photo of your dash and your VIN. We'll confirm the moulding and harness first.
Check the 9613/2613 for your Mazda 3It does, and that's the version most of these go into. Your radio and its recess come out, the moulding fills your aperture, the vents stay put.
No. The fascia replaces the top shelf and vent surround only, so your hazard switch and climate dials keep their function.
On cars that have them they run through the CAN box, and there's a CANBUS setting screen for your model.
The 10.1 inch screen fills the shelf edge to edge, the 9 inch screen leaves more black around the glass. Same frame, so it's a look.
Yes. There's a reversing menu on the radio and we list AHD and 360 cameras separately. I'd fit it with the fascia off; the run to your tailgate is the tedious half.
Only if a clip isn't seated. Push the vent frame home until you feel each clip, then test the blower. That's the awkward one I keep hearing about.
If you are an installer or wholesale partner interested in 9613/2613 bulk orders or custom fascia modification, reach out to our team for special terms and technical document packages.
