Parking bumps, driveway curbs, and front blind spots are some of the most common — and expensive — everyday driving hazards. The WITSON Dual Camera Switching Module adds intelligent front-and-rear camera control to your existing aftermarket Android head unit or universal car stereo, so you see exactly what matters before you move.
Adds front camera switching to any head unit that already supports a rear camera input.
Rear view shows automatically when you shift into reverse.
Front camera stays on for 10 seconds after leaving reverse and for 8 seconds at startup.
One-button override switches between front and rear views at any time.
Most factory and aftermarket stereos only show the rear camera when reversing. That helps when you are backing up, but it does nothing for the space directly in front of your bumper — the low wall in a parking garage, the curb at a drive-through, the bike lying in the driveway, or the tight gap when pulling out of a steep ramp.
A dedicated front camera fixes the blind spot, but without smart switching you still have to fumble through menus or wire a manual toggle. The WITSON control box solves both problems: it handles the switching logic for you, so the right camera appears at the right moment.
Shift into reverse and the rear camera displays automatically.
Press the button once while reversing to switch to the front camera view.
After shifting out of reverse, the front view stays on screen for 10 seconds.
Driving or parked, press the button to activate the front camera anytime.
On ignition, the front camera automatically displays for 8 seconds.
See how the automatic front-camera activation and reverse-to-front switching works in a real vehicle install. This short demo covers startup display, reverse priority, and the one-button override.
Watch the full video on YouTube
Add both front and rear cameras to a new multimedia install with clean, automatic switching.
Already have a rear camera? Add front-view switching without replacing your head unit.
Perfect for tight streets, driveways, parking lots, and any situation with limited forward visibility.
Make every drive easier, safer, and more confident with a button that shows what matters.
| Product Name | WITSON Dual Camera Switching Module |
| Camera Inputs | Front + Rear camera video input |
| Video Output | Single composite video output to monitor / head unit |
| Power Supply | ACC DC 12V + Ground |
| Reverse Trigger | Automatic rear-camera priority on reverse signal |
| Switch Control | External momentary push button |
| Smart Timing | 10s front view after reverse; 8s front view at startup |
| Compatibility | Aftermarket Android head units and universal car stereos with camera video input |
Yes. The control box is designed to work with your existing rear camera while adding front-camera functionality.
Yes. It is especially suitable for aftermarket Android head units and universal car stereos with a camera video input.
Yes. Simply press the external switch to activate the front view, then press again to exit.
The rear camera takes priority automatically, with the option to switch to the front camera using the button.
No. The module uses standard ACC 12V power, ground, reverse trigger, and composite video connections. Mount the control box, connect the cameras, and route the button to a convenient location near the gear shift, center console, or steering wheel.
Add smart front-and-rear camera switching to your vehicle without replacing your head unit. One button. Two cameras. More visibility when you need it.
View the Dual Camera Switching ModuleReady to add front and rear camera control to your car? View the full specifications, wiring details, and gallery on the WITSON Dual Camera Switching Module product page and contact the WITSON team for bulk pricing or compatibility questions.
